Quick Inquiry


Cisco 809

Cisco 809

Intel® Atom® E3900/Celeron® N3350/Pentium® N4200 series fanless IoT gateway


  • Mechanical/Environmental
    • Form-factor, Width X Length X Height: 5.05″ x 6.27″ x 1.15″ (12.8 x 15.9 x 2.9 cm)
    • Mounting Options: Wall, floor, cabinet, shelf, and DIN Rail mounting
    • -40C to +60C operating temperature (outside ambient)
    • 5Kft altitude
  • External Power Entry
    • 9.6V to 60VDC; Nominal: 12 to 48VDC
    • 4-pin 3.8 mm EURO power connector
  • External Reset/Recovery Push Button
  • WWAN Modem
    • 1x internal Mini PCIe slot for Single multi-band 2G/3G/4G/LTE cellular modem
    • Dual USIM Card slots (2 external SIM card slots). Provides Redundancy and multi-homing
      capabilities over LTE and HSPA-based networks.
  • WAN Ports
    • 2x RJ45 10/100/1000 Gigabit Ethernet
  • Serial Ports
    • 1 x RJ45 RS232 DTE Port
    • 1 x RJ45 RS232/RS485 DCE Port (SW-configurable)
  • USB Ports
    • 1x USB2.0 Type A External Host Port
    • 1x USB2.0 Type Mini-B External Debug/Console Device Port
  • Compliance
    • Telcordia GR-3108 Class 2 deployment
    • Class A EMC or better
    • RoHS6
    • IP30 compliant when vertical, IP40 compliant when mounted flat on a horizontal surface


The Cisco 809 Integrated Services Router (IR809), part of the Cisco Integrated Services Routers Generation 2 (ISR G2) Family, is designed as a next generation ruggedized fixed form factor router. It is a small-form factor router with LTE, for use in ATM, POS, Telemetry, Billboards, Enterprise Fleet markets, Utilities and other SCADA (Supervisory Control and Data Acquisition) environments. The following figure shows the IR809.

Dimensions (H x W x D) (height x width x depth x) are 5.05″ x 6.27″ x 1.15″
(12.8 x 15.9 x 2.9 cm).
Weight 1 lb 11 oz. (0.77 kg)
Operating Temperature and Altitude -40° to 140°F (-40° to 60°C) in a sealed NEMA
cabinet with no airflow
-40° to 158°F (-40° to 70°C) in a vented cabinet with
40 lfm of air
-40° to 167°F (-40° to 75°C) in a forced air enclosure
with 200 lfm of air
(type tested at +85C for 16 hours)
-500 to 5,000 feet. Derate max operating temperature
1.5°C per 1000 feet. 10,000 ft maximum
Non-Operating Temperature –40 to158°F (–40 to 85°C)
Altitude 4570 m (15,000 ft)
Humidity 10% to 95% non-condensing
Vibration MIL-STD-810, EN50155, SAE-J1455
Shock Half Sine (operating)
Duration = <2 ms
Velocity = 2.11 m/s
Standard Safety Certifications UL 60950-1, 2nd edition
CAN/CSA C22.2 No. 60950-1, 2ndedition
EN 60950-1, 2nd edition
CB to IEC 60950-1, 2nd edition with all group differences and national deviations
EN50155 and IEC61850
NUP T2 shock testing, non-NEBS 3396
EMC Emissions EN55022/CISPR22, CFR 47 Part 15, ICES003,
VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-
386, EN61000-3-2, EN61000-3-3, and EN61000-6-1
EMC Immunity EN55024/CISPR24, (EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-11), and EN300-386
Radio Immunity EN301 489-1, EN 301 489-7, and EN301 489-24
Cellular Radio EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR
Part 22, 47 CFR Part 24 and EN 301 908-13
Compliance IP30 compliant when vertical, IP40 compliant when
mounted flat on a horizontal surface
Temperature -40 to 85°F (–40 to +29°C)
Humidity 10% to 95%
Altitude 4570 m (15,000 ft)
Input Voltage Nominal voltage: 12V to 48V DC
Min/max voltage: 9.6 to 60V DC input
Max, Min current: 2A, 0.4A
Maximum Power Consumption 20 Watts